VW karmann ghia fuel system carbs & manifolds parts from Auto Craft Engineeering

more details on Carburetor, 34 pict-3 - Twin port

Part Number: 113-129-031/K

12 volt, 34 Pict-3 Carburetor, mainly used for twin port 1600cc engines.

£189.05
£199.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Accelerator cable clamp - Various aircooled

Part Number: 111-129-921

Swivel clamp for accelerator to cable to carburetor operating arm and heater cable to heat exchanger operating arm on most air-cooled VWs.

£1.42
£1.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Accelerator return spring kit - Type 1 & 2

Part Number: 111-198-500

Accelerator return spring kit for early air cooled engines

includes cable guide tube, spring seat, spring and spring cap.

The kit fits between the fan shroud and carbs without built in return spring.

£23.70
£24.95 Sale Price
Per Kit (inc VAT)
Click here to enquire
about this product

Air cut off valve, 12v - Various aircooled

Part Number: 049-129-412/C

12 volt carburetor air cut off solenoid valve for the carburetor.

£17.10
£18.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Carb spacer, alternator conversion, 10mm - various aircooled

Part Number: 211-129-587

The larger diameter of the main body on the alternator means that 34 PICT carbs foul when fitting an alternator conversion. This 10mm spacer lifts the carburetor up to provide the required clearance.

£15.67
£16.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Carburettor return spring - Various aircooled

Part Number: 113-129-881/A

Carburetor return spring.

£1.42
£1.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Choke element, 12v - Various aircooled

Part Number: 113-129-191/G

12 volt auto choke unit for 30-34 PICT Solex Carburetors.

£21.85
£23.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Dual carb linkage - Various aircooled

Part Number: 043-129-941

Rotary action dual carburetor linkage for Weber IDF and Empi carburetors.

£57.00
£60.00 Sale Price
Per Kit (inc VAT)
Spin Up Spin Down

Fuel cut off valve, 12v - Various aircooled

Part Number: 058-129-413/D

12 volt fuel idle jet cut off valve for the following carburetors.

30 PICT
31 PICT
30 PICT 2
34 PDSIT-2

£28.50
£30.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Universal carburetor rebuild kit - various aircooled

Part Number: 111-198-569/ZW

Carburetor rebuild kits for 28 Pict, 30 Pict and 34 pict 3 carburetors. Complete with floats, filter and needle valve. Please note this kit is not suitable for 31 Pict 4 carburetors.

£25.17
£26.50 Sale Price
Per Kit (inc VAT)
Spin Up Spin Down

Carburettor rebuild kit, 31 PICT 4 - Various aircooled

Part Number: 111-198-569/C

Carburetor rebuild kit for 31 PICT 4 carburetors. Includes gaskets and diaphragms, but not jets.

£23.75
£25.00 Sale Price
Per Kit (inc VAT)
Spin Up Spin Down

Carburettor base gasket - Single port & 1300cc Twin port

Part Number: N 13 778 1

Carburettor base gasket for the carburettor base to the manifold on single port engines, 30/31mm PICT.

£2.38
£2.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Carburettor base gasket - 1600cc Twin port

Part Number: 113-129-707/C

Carburetor base gasket for 34 Pict 3/4 carburettors

£1.80
£1.90 Sale Price
Each (inc VAT)
Spin Up Spin Down

Inlet manifold, single port - 1300-1600cc

Part Number: 113-129-701/K

Single port inlet manifold for 1300cc to 1600cc Type 1/upright engines.

£68.35
£71.95 Sale Price
Each (inc VAT)
Spin Up Spin Down

Gasket, inlet manifold to head - single port

Part Number: 311-129-707

Standard single port inlet manifold/cylinder head crush gasket. For use on 1300cc to 1600cc Single port engines.

£2.14
£2.25 Sale Price
Each (inc VAT)
Spin Up Spin Down

Inlet manifold, Twinport - 1600cc

Part Number: 113-129-701/L

Twin port inlet manifold centre section for 1600cc Type 1/upright engines with single hot spot exhaust. Outer diameter of manifold tube is 34 mm.

£92.62
£97.50 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Inlet manifold end, Left - Twin port

Part Number: 113-129-709/G

Twin port intake manifold end casting for the left hand side of the engine.

£85.50
£90.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Inlet manifold end, right - Twin port

Part Number: 113-129-710/G

Twin port intake manifold end casting for the right hand side of the engine.

£85.50
£90.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Gasket, inlet manifold to head - Twin port

Part Number: 113-129-717/A

Inlet manifold Gasket for twin Port engines.

£1.61
£1.70 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Boot, inlet manifold - Twinport

Part Number: 113-129-729/B

Rubber seal for the inlet manifold on twin port, upright Type 1 based engines.

£2.85
£3.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Fuel hose clip, crimp type, 11mm

Part Number: 111-127-537/A

Crimp type fuel hose for 11mm to 13mm outer diameter fuel hose.

£2.38
£2.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Fuel hose clip, screw type, 5mm

Part Number: N 24 528 1

Screw type fuel hose clip for 8mm to 12mm outer diameter fuel hose.

£1.42
£1.50 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Hose, air cleaner to carburettor - Type 2, 63>67 & Ghia>67

Part Number: 211-129-627

Hose for the oil bath air filter to the carburetor. Suitable for the following vehicles

Split Screen Bus 1200cc to 1500cc from 1963 to 1967.
Karmann Ghia 1300cc up to 1966.
Karmann Ghia 1500cc up to 1967.

£26.12
£27.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Elbow pipe, air cleaner to carburettor - Type 2 & 14

Part Number: 211-129-615/F

Air cleaner to carburetor rubber elbow.

£43.70
£46.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Pancake air filter, chrome - 1200cc-1600cc

Part Number: 111-129-781

Pancake style air filter for use on stock carburetors. Supplied with a paper filter element, chrome base and top. Fitted with a 1/2'' hose barb for use with the standard oil filler/breather. The diameter of the air filter is 165mm and the diameter of the opening is 52mm.

£13.30
£14.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Pancake air filter, chrome - 1200-1600cc

Part Number: 111-129-741

Aftermarket pancake style air filter for use on stock carburettors. Supplied with a foam filter element, chrome base and top. Fitted with a 1/2'' hose barb for use with the standard oil filler/breather.

£20.42
£21.49 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Cone air filter, chrome - Various aircooled

Part Number: 111-129-900

Cone air filter with a chrome top and cotton gauze. Can be used on all carburetors with a 52mm opening but is designed for use on Weber 34 ICT and FRD carburetors.

£16.10
£16.95 Sale Price
Each (inc VAT)
Spin Up Spin Down

Fuel distribution block, polished - Various aircooled

Part Number: ACE0005/POL

Aluminium fuel distribution block.

Eliminates the mess of fuel lines.

Provides even fuel distribution to multi carb set ups.

£39.60
£49.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Carburettors, Inlet Manifold, Gaskets etc

'Air Supply' Newsletter