Vintage speed, Type 1 exhausts
Part Number:
155-203-435/00
Stainless steel superflow, equal length 130mm exhaust system for beetles fitted with a type 4 engine.
- Fully TIG welded, all flanges, no gas leaking.
- 304 stainless steel muffler with 304 polished tail pipes.
- Fit stroker Engine with stock Rod, or 2mm (or less) under cylinder.
- Thick Flange can be match port.
- Built in M18 nuts, for tuning when using an O2 sensor.
- Fit under your rear apron from 1950 to 1977 Type 1 Beetle, Karmann Ghia.
Vintage speed, Type 2 exhausts, up to 1967
Part Number:
155-206-052/00
Stainless steel, heater style sports exhaust system with standard tailpipe exit for splitscreen busses with a later style type 1 based engine. Fitting kit is included.
- +/- 4mm Adjustable flanges for stroker or narrower engines.
- Sport muffler for engines up to 125 HP.
- 100% #304 stainless steel muffler, tail pipes and headers.
- Built in M18 x 1.5 nuts for Lamda sensor when tuning carburetors.
- Fiberglass fire sleeve on #2 and #4 header pipes were designed to protect fresh air hoses.
If using a single carburetor you will require the Vintage speed
heat riser pipes.
Flange adapters may also be required depending what style/size heat exchanger or J tube you are using.
£541.50
£570.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Part Number:
155-206-052/SF
Stainless steel, heater style superflow exhaust system with standard tailpipe exit for splitscreen busses with a later style type 1 based engine. Fitting kit is included.
- +/- 4mm Adjustable flanges for stroker or narrower engines.
- SuperFlow muffler for engines up to 150HP.
- 100% #304 stainless steel muffler, tail pipes and headers.
- Built in M18 x 1.5 nuts for Lamda sensor when tuning carburetors.
- Fiberglass fire sleeve on #2 and #4 header pipes were designed to protect fresh air hoses.
If using a single carburetor you will require the Vintage speed heat riser pipes.
Flange adapters may also be required depending what style/size heat exchanger or J tube you are using.
£570.00
£600.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Vintage speed, Type 2 exhausts, from 1968 to 1979
Part Number:
155-209-052/00
Stainless steel, heater style sports exhaust system with standard tailpipe exit for bay window busses with a 1600cc type 1 based engine. Fitting kit is included.
- +/- 4mm Adjustable flanges for stroker or narrower engines.
- Sport muffler for engines up to 125 HP.
- 100% #304 stainless steel muffler, tail pipes and headers.
- Built in M18 x 1.5 nuts for Lamda sensor when tuning carburetors.
- Fiberglass fire sleeve on #2 and #4 header pipes were designed to protect fresh air hoses.
If using a single carburetor you will require the Vintage speed
heat riser pipes.
Flange adapters may also be required depending what style/size heat exchanger or J tube you are using.
Part Number:
155-210-052/00
Stainless steel, heater style sports exhaust system with hidden tailpipe for bay window busses with a 1600cc type 1 based engine. Fitting kit is included.
- +/- 4mm Adjustable flanges for stroker or narrower engines.
- Sport muffler for engines up to 125 HP.
- 100% #304 stainless steel muffler, tail pipes and headers.
- Built in M18 x 1.5 nuts for Lamda sensor when tuning carburetors.
- Fiberglass fire sleeve on #2 and #4 header pipes were designed to protect fresh air hoses.
If using a single carburetor you will require the Vintage speed
heat riser pipes.
Flange adapters may also be required depending what style/size heat exchanger or J tube you are using.
£541.50
£570.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Part Number:
155-208-R35/00
Stainless steel, sports exhaust system for 1972 to 1979 bay window busses with type 4 engines, 1700cc to 2000cc.
- Fully TIG welded, all flanges, no gas leaking.
- 304 stainless steel muffler with single 304 polished tail pipes.
- 304 Stainless steel Flanges can be match ported.
- Built in M18 nuts, for tuning when using O2 sensor.
- Fit under rear apron for type 4 engine baywindow bus pre 1979.
- For Type 4 engine up to 125HP.
- Include Gaskets set for muffler.
- Muffler will clear original tow hook.
Please note, this will not fit Californian heat exchangers with triangular flanges. To fit a 1972 vehicle the right side bumper bracket may need trimming slightly to clear the tailpipes.
£541.50
£570.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Part Number:
155-209-052/SF
Stainless steel, heater style superflow exhaust system with standard tailpipe exit for bay window busses with a 1600cc type 1 based engine. Fitting kit is included.
- +/- 4mm Adjustable flanges for stroker or narrower engines.
- SuperFlow muffler for engine up to 150HP.
- 100% #304 stainless steel muffler, tail pipes and headers.
- Built in M18 x 1.5 nuts for Lamda sensor when tuning carburetors.
- Fiberglass fire sleeve on #2 and #4 header pipes were designed to protect fresh air hoses.
If using a single carburetor you will require the Vintage speed
heat riser pipes.
Flange adapters may also be required depending what style/size heat exchanger or J tube you are using.
£522.50
£550.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Part Number:
155-210-052/SF
Stainless steel, superflow exhaust system with hidden tail pipe for bay window busses with type 1 engines.
- +/- 4mm Adjustable flanges for stroker or narrower engines.
- Muffler itself is about 20mm higher than the engine rear support bar, #209 Tail pipe exit is about 18mm below the rear bumper.
- SuperFlow muffler for engine up to 150HP.
- 100% #304 stainless steel muffler, tail pipes and headers.
- Built in M18x1.5 nuts for Lamda sensor when tuning carburetors.
- Fiberglass fire sleeve on #2 and #4 header pipes were designed to protect fresh air hoses.
If using a single carburetor you will require the Vintage speed heat riser pipes.
Flange adapters may also be required depending what style/size heat exchanger or J tube you are using.
£570.00
£600.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Part Number:
155-208-035/SF
Stainless steel, superflow exhaust system for 1972 to 1979 bay window busses with type 4 engines. Will also fit T3/T25's with type 4 CU engines and early 1900cc waterboxer (carburetor engine) with slight modification to the corner of the rear valance to clear the tail pipes.
- Superflow muffler for up to 150hp.
- 100% #304 stainless steel muffler.
- Built in M18 x 1.5 nuts for Lamda sensor when tuning carburetors.
Please note, this will not fit Californian heat exchangers with triangular flanges. To fit a 1972 vehicle the right side bumper bracket may need trimming slightly to clear the tailpipes.
Vintage speed, Type 3 exhausts
Part Number:
155-205-052/00
Stainless steel heater style sports exhaust system with tail pipe for Type 3 vehicles.
- +/- 4mm Adjustable flanges for stroker or narrower engines.
- Sport muffler for engines up to 125 HP.
- 100% #304 stainless steel muffler, tail pipes and headers.
- Built in M18 x 1.5 nuts for Lamda sensor when tuning carburetors.
- Fiberglass fire sleeve on #2 and #4 header pipes were designed to protect fresh air hoses.
If using a single carburetor you will require the Vintage speed
heat riser pipes.
Flange adapters may also be required depending what style/size heat exchanger or J tube you are using.
£569.95
£599.95 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Vintage speed J-tubes
Part Number:
155-200-038/00
Vintage speed, stainless steel 38mm J tubes for original style mufflers. Supplied with two gaskets for the exhaust port.
£118.75
£125.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Part Number:
155-200-238/FG
Vintage speed, stainless steel 38mm J tubes with flanges for use with Vintage speed
flange adapters or Vintage speed exhaust systems.
£142.50
£150.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product
Vintage speed flange adapters
Part Number:
155-200-101/FA
Vintage speed flange adapters for fitting flanged heat exchangers or J-tubes with a 35mm bore to Vintage speed exhausts.
Part Number:
155-200-100/FA
Vintage speed flange adapters for fitting flanged heat exchangers or J-tubes with a 38mm bore to Vintage speed exhausts.
Vintage speed heat risers
Part Number:
AC251803
38mm stainless steel heat riser pipes for vintage speed exhausts.
Vintage speed fitting kits and gaskets
Part Number:
155-052-ADJGASKET
Fitting kit for vintage speed heater style exhaust systems.
Part Number:
VS Type 4
Fitting kit for vintage speed type 4 exhaust systems.
Lambda sensor parts
Part Number:
ACE0014
Weld on stainless steel Lambda sensor nut.
M18 x 1.5.