VW bay window engine parts - 1200cc to 1600cc tinware and cooling parts from Auto Craft Engineeering

Thermostat pushrod - Various aircooled

Part Number: 211-119-163/A

Thermostat push rod for all 1200cc to 1600cc Type 1/upright engines.

£7.96
£9.95 Sale Price
Each (inc VAT)
Spin Up Spin Down

Cooling fan, single port, 316mm - Various aircooled

Part Number: 113-119-031/A

316 mm engine cooling fan for single port engines with oil cooler inside the original fan-housing (Non-doghouse).

£21.60
£27.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Cooling fan, twin port, 368mm - Various aircooled

Part Number: 131-119-031

368mm engine cooling fan to fit 1300cc to 1600cc Twinport engines with Doghouse oil cooler, and many aftermarket non-doghouse fan housings.

£20.00
£25.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Cooling fan hub kit - Various aircooled

Part Number: 111-198-123/A

Mounting kit for main engine cooling fan to dynamo/alternator. Includes the fan hub, main nut and two washers. Suitable for all upright/Type 1 based air-cooled engines.

£16.00
£20.00 Sale Price
Per Kit (inc VAT)
Click here to enquire
about this product

Fan hub nut - Various aircooled

Part Number: 111-119-141/A

Mounting nut for the main engine cooling fan on the rear of the generator/alternator on all Type 1 based upright aircooled engines.

£6.40
£8.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Flat washer for fan hub - Various aircooled

Part Number: 111-119-133/B

Flat washer for main engine cooling fan on all upright Type 1 style engines.

£2.00
£2.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Backing plate kit, Dynamo/Alternator

Part Number: 211-119-471/KIT

Three piece backing plate kit for engines using an alternator or 30 amp dynamo. Will not fit 38 amp dynamos.

The backing plates are coated in a black packing paint. We recommend that the item is either painted or powder coated for a long lasting finish.

£14.63
£18.29 Sale Price
Per Kit (inc VAT)
Spin Up Spin Down

Doghouse fanshroud, with air outlets - Twin port

Part Number: 113-119-025/J

30 hp style doghouse fan shroud with fresh air outlets, finished in black. Fitted with correct internal ducts/vanes. These fan shrouds should be used with twin port cooling fans.

Item is supplied in a packing paint for transit. For a long lasting finish we advise that this item is painted or powdercoated.

£74.40
£93.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Doghouse fanshroud, without air outlets - Twin port

Part Number: 113-119-025/C

30 hp style doghouse fanshroud without fresh air outlets, finished in black. Fitted with correct internal ducts/vanes. These fan shrouds should be used with twin port cooling fans.

Item is supplied in a packing paint for transit. For a long lasting finish we advise that this item is either painted or powdercoated.

£86.40
£108.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Accelerator cable conduit, through fan shroud - Various aircooled

Part Number: 043-129-893

Accelerator cable conduit through the fan shroud on most air cooled vehicles.

£3.40
£4.25 Sale Price
Each (inc VAT)
Spin Up Spin Down

Accelerator cable tube, standard type, polished - Various aircooled

Part Number: ACE0004/POL

Accelerator cable guide tube, designed to aid the position of the cable through the fan shroud to the carburettor.

Made from a stainless steel tube with a Machined Aluminium body. Fits any Type 1 engine with an upright fan shroud and a single carburettor.

Machine polished and supplied with a mounting screw, which will require a hole to be drilled into the fan shroud.

£28.00
£35.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Accelerator cable tube, standard type, non-polished - Various aircooled

Part Number: ACE0004

Accelerator cable guide tube, designed to aid the position of the cable through the fan shroud to the carburettor.

Made from a stainless steel tube with a Machined Aluminium body. Fits any Type 1 engine with an upright fan shroud and a single carburettor.

Supplied with a mounting screw, which will require a hole to be drilled into the fan shroud.

£24.00
£30.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Accelerator cable tube, with bearing, polished - Various aircooled

Part Number: ACE0003/POL

Damaged accelerator cables on a twin carburettor engine are a common problem due to poor alignment of the cable tube and linkage. This tube with a bearing will help to solve the issue and result in a smoother travel of the cable.

Made from a stainless steel tube with a machined Aluminium body, designed to aid the position of the accelerator cable. Fits any Type 1 engine with an upright fan shroud and twin carburettors.

Machine polished and supplied with a mounting screw which will require a hole to be drilled into the fan shroud.

£36.00
£45.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Accelerator cable tube, with bearing, non-polished - Various aircooled

Part Number: ACE0003

Damaged accelerator cables on a twin carburettor engine are a common problem due to poor alignment of the cable tube and linkage. This tube with a bearing will help to solve the issue and result in a smoother travel of the cable.

Made from a stainless steel tube with a machined Aluminium body, designed to aid the position of the accelerator cable. Fits any Type 1 engine with an upright fan shroud and twin carburettors.

Supplied with a mounting screw, which will require a hole to be drilled into the fan shroud.

£32.00
£40.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Spring, fan housing flaps - various aircooled

Part Number: 113-119-279

Fanhousing cooling flap return spring. Fits both doghouse and non doghouse fanshrouds.

£6.40
£8.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Compression spring - accelerator push rod/fan housing

Part Number: 211-721-617

Compression spring for the accelerator pedal push-rod, two required. Also used for the fan housing air flaps, four required.

£0.96
£1.20 Sale Price
Each (inc VAT)
Spin Up Spin Down

Tinware support brackets, pair - Type 2, 72>79

Part Number: 211-198-505

Pair of tinware support brackets for the rear tinware on bay window busses from 1972 to 1979. Made in house and finished in black powder coat.

£12.00
£15.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Engine bay seal - Type 2, 72>79

Part Number: 411-813-225
Seal for tinware to body in the engine bay. Fits Bay window busses from 1972 to 1979.

£20.60
£25.75 Sale Price
Each (inc VAT)
Spin Up Spin Down

Tinware set, Dog house - Twin port

Part Number: 113-119-419

Two piece tinware set (including seals) for dog House oil cooler on Twin Port upright/Type 1 based engines.

£25.60
£32.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Tinware, behind crank pulley - Various aircooled 60>71

Part Number: 113-119-533/G

Breastplate/Tinware behind crank pulley. Narrow width, for use with most aircooled VWs using Type 1/upright engines up to 1971, without oil bath air cleaner pre-heat pipe.

£14.40
£18.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Tinware, behind crank pulley - Type 1 & 2, 72>79

Part Number: 113-119-533/N

Breastplate/Tinware behind the crank pulley. Wider width, for use with most aircooled VWs using Type 1/upright engines up from 1972 onwards.

£16.80
£21.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Tinware, cylinder baffle plate - Various aircooled

Part Number: 311-119-317

Standard cylinder baffle plates. Fitted below each pair of cylinders. Sold individually, two required per engine.

£4.00
£5.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Tinware, cylinder head cover, left - Twin port upright engines

Part Number: 211-119-303

Left hand side twin port cylinder head cover for cylinders three and four.

£46.40
£58.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Tinware, rear, no cut-outs - Various aircooled

Part Number: 113-119-527/C

Rear tinware with no cut outs for Type 1/upright engines on most air-cooled VW's from 1960 to 1971 with narrow width crank pulley tin, and without the oil bath air filter intake pre heater hose.

This piece has no fan housing to heat exchanger holes, or inlet manifold pre-heat cut-outs and is suitable for engines running an aftermarket exhaust without pre heat manifold pipe and no heat exchangers.

Item is supplied in packing paint for transit. For a long lasting finish we advise that this item is painted or powdercoated.

£27.16
£33.95 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Tinware, rear, with fresh air holes & preheat cut-outs - Various aircooled

Part Number: 043-119-523/C

Rear tinware for Type 1/upright engines on most air-cooled VW's from 1960 to 1971 with narrow width crank pulley tin, and without the oil bath air filter intake pre heater hose.

This piece has the inlet manifold pre-heat cut-outs and fan housing to heat exchanger holes and is suitable for engines running a stock exhaust with pre-heat manifold pipe and heat exchangers.

Item is supplied in packing paint for transit. For a long lasting finish we advise that this item is painted or powder coated.

£22.80
£28.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Tinware, rear, with fresh air holes - Various aircooled

Part Number: 113-119-523/F

Rear tinware with for Type 1/upright engines on most air-cooled VW's from 1960 to 1971 with narrow width crank pulley tin, and without the oil bath air filter intake pre heater hose.

This piece has the fan housing to heat exchanger holes, but no inlet manifold pre-heat cut-outs and is suitable for engines running heat exchangers and an aftermarket exhaust without pre heat manifold pipe.

Item is supplied in packing paint for transit. For a long lasting finish we advise that this item is painted or powdercoated.

£22.00
£27.50 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Tinware, rear, with preheat cut-outs - Various aircooled

Part Number: 111-119-527/F

Rear tinware for Type 1/upright engines on most air-cooled VW's from 1960 to 1971 with narrow width crank pulley tin, and without the oil bath air filter intake pre-heater hose.

This piece has the inlet manifold pre-heat cut-outs but no fan housing to heat exchanger holes and is suitable for engines running a stock exhaust with pre-heat manifold pipe but without heat exchangers.

Item is supplied in packing paint for transit. For a long lasting finish we advise that this item is painted or powdercoated.

£24.00
£30.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Tinware, under cylinders, left - Various aircooled

Part Number: 043-119-351/B

Tinware for under the left cylinder head, for use with 1300cc to 1600cc engines. Item is supplied in a packing paint for transit. For a long lasting finish we advise that this item is painted or powder coated.

£16.00
£20.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Front tinware, over gearbox - Single port

Part Number: 113-119-517/R

Front engine tinware over the gearbox for all single port engines.

£24.00
£30.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Air deflector plates - Various aircooled

Part Number: 113-119-357

One pair of tinware air deflector plates for Type 1 based upright engines.

£22.00
£27.50 Sale Price
Pair (inc VAT)
Spin Up Spin Down

Air hose, heavy duty plastic - Type 1 & 2, 61>79

Part Number: 113-255-291/P

Heavy duty plastic air hose for in between the fan housing and heat exchanger. 265mm long with 50mm diameter.

£4.00
£5.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Air hose, fan housing to heat exchangers (aluminium) - Various aircooled

Part Number: 028-129-087/F

Aluminium hose for connecting fan housing outlets to heat exchangers. Also for late air bath hot air bypass tubes. 500mm length and 50mm internal diameter.

£5.60
£7.00 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Air hose, fan to heat exchanger (cardboard) - Type 1 & 2, 61>79

Part Number: 028-129-087/A

Standard 50mm diameter cardboard air hose for upright type 1 based engines. Used for connecting the fan housing to the exhaust.

£5.91
£7.39 Sale Price
Each (inc VAT)
Spin Up Spin Down

Clamp, fresh air tube - upright aircooled engine

Part Number: 111-501-159/B

Fresh air tube clamp for all upright air cooled engines. 44-46mm diameter.

£5.99
£7.49 Sale Price
Each (inc VAT)
Spin Up Spin Down

Connection pipe - upright aircooled engine

Part Number: 113-255-165

Connecting pipe for exhaust to fresh air tube for all upright air cooled engines. 44-46 mm diameter.

£3.36
£4.20 Sale Price
Each (inc VAT)
Spin Up Spin Down

Gaskets, preheat pipe to tinwear - Various aircooled

Part Number: 113-119-597

Pre-heat pipe to tinware insulation for single hot spot inlet manifolds.

£6.40
£8.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Heater tube, heat exchanger to body - Type 1 & 2, 63>71

Part Number: 113-255-355/M

Heater tube from heat exchanger to body, 360mm long with 60mm diameter ends.

£30.80
£38.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Rubber Grommet, fresh air tube - upright aircooled engine

Part Number: 113-119-585/A

Fresh air tube sealing grommet for all upright air cooled engines.

£4.00
£5.00 Sale Price
Each (inc VAT)
Spin Up Spin Down

Rubber Grommet, fresh air tube - upright aircooled engine

Part Number: 113-119-571

Fresh air tube sealing grommet for all upright air cooled engines.

£5.20
£6.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Seal, oil filler pipe to tinware - Various aircooled

Part Number: 111-115-491

Oil breather/overflow pipe to tinware seal for use on upright Type 1 based engines.

£3.40
£4.25 Sale Price
Each (inc VAT)
Spin Up Spin Down

Complete heat exchanger kit, pair - Type 1 & 2 63>79

Part Number: 043-298-250

Pair of heat exchangers including gaskets, air hose and fitting kit.

£244.00
£305.00 Sale Price
Per Kit (inc VAT)
Click here to enquire
about this product

Heat exchanger, left - Type 1 & 2 63>79

Part Number: 043-255-107

Standard, steel, left side fresh air heat exchanger. Fitting kit (including operating arm) available separately.

£85.59
£106.99 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Heat exchanger, right - Type 1 & 2 63>79

Part Number: 043-255-108

Standard, steel, right side fresh air heat exchanger. Fitting kit (including operating arm) available separately.

£85.59
£106.99 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Heat exchanger fitting kit, left - Type 1 & 2 63>79

Part Number: 043-298-147/A

Fitting kit for the left side heat exchanger. Includes operating arm, cable connector, pivot pins, blanking plug, tension spring, exhaust gasket and fitting nuts.

£8.16
£10.20 Sale Price
Per Kit (inc VAT)
Spin Up Spin Down

Heat exchanger fitting kit, right - Type 1 & 2 63>79

Part Number: 043-298-148/A

Fitting kit for the right side heat exchanger. Includes operating arm, cable connector, pivot pins, blanking plug, tension spring, exhaust gasket and fitting nuts.

£6.80
£8.50 Sale Price
Per Kit (inc VAT)
Spin Up Spin Down

Tinware, lower right, under thermostat - Various aircooled

Part Number: 113-119-352/C

Lower Right cylinder under tin, under the thermostat, for use with 1300cc to 1600cc engines.

£10.00
£12.50 Sale Price
Each (inc VAT)
Spin Up Spin Down

Front tinware, over gearbox - Twin port

Part Number: 113-119-517/S

Front engine tinware over the gearbox for all twin port engines.

£27.99
£34.99 Sale Price
Each (inc VAT)
Click here to enquire
about this product

Tinware, Fans, Thermostats etc

'Air Supply' Newsletter