Home
select
  • Filter by Vehicle
  • Split Screen Van
  • Bay Window
  • T25
  • Beetle
  • Karmann Ghia
  • Type 3
  • Tow Bars & Cycle Carriers
  • Wheels
  • Exhausts
  • Consumables
  • Merchandise
select
  • Filter by Manufacturer
  • ATE
  • Auto Craft
  • Beru
  • Bosch
  • Buttys Bits
  • Classic Line
  • Cykell
  • Elring
  • Empi
  • Fania
  • Flat 4
  • GEMO
  • Hella
  • Hoffmann Speedster
  • Jopex
  • JP Group
  • KYB
  • LUK
  • Meyle
  • Nakata
  • Pertronix
  • SSP
  • Varga
  • VDO
  • Vintage speed
  • VW
  • Wolfgang International
  • Wolfsburg West

My shopping cart:  0 Items
View Cart
  • Home
  • Shop
  • Contact
  • About
  • Login
  • Price List
  • Checkout
  • Account
  • Split Screen Van
    • Engine Parts
    • Exhausts
    • Fuel System
    • Gearbox & Final Drive
    • Steering and Suspension
      • Front Beam
      • Front Suspension
      • Shock Absorbers
      • Steering Components
      • Steering Wheel/Column
      • Wheel Bearings
      • Reduction Boxes
      • Rear Suspension - Swing Axle
      • Rear Suspension, IRS
    • Wheels and Brakes
    • Hand & Foot Controls
    • Tow Bars
    • Panels & Body Parts
    • Pick up Panels
    • Door Parts
    • Rubbers and Seals
    • Window Parts
    • Exterior Trim
    • Interior Parts
    • Electrical
    • Lights and Lenses
    • Tools and Accessories
  • Bay Window
  • T25
  • Beetle
  • Karmann Ghia
  • Type 3
  • Tow Bars & Cycle Carriers
  • Wheels
  • Exhausts
  • Consumables
  • Merchandise
Shop  |  Split Screen Van  |  Steering and Suspension  |  Rear Suspension, IRS

IRS Parts & Components

Display:
more details on Rear torsion arm bush - Type 2, 50>79
Rear torsion arm bush - Type 2, 50>79
Part Number: 211-511-245/A
Rubber bush for the rear torsion arm on all splitscreen and bay window vans. 4 required per vehicle.
£3.00 Each (inc VAT)
Spin UpSpin Down
more details on Rear torsion arm cover - Type 2, >79
Rear torsion arm cover - Type 2, >79
Part Number: 211-511-225
Cover for the rear torsion arm on all splitscreen and bay window vans.
£10.00 Each (inc VAT)
Spin UpSpin Down
more details on Castle nut, rear hub - Various aircooled
Castle nut, rear hub - Various aircooled
Part Number: 311-501-221
36mm Rear axle/brake drum castle nut.
£5.00 Each (inc VAT)
Spin UpSpin Down
more details on Oil seal, rear wheel bearing - Type 2, 68>92
Oil seal, rear wheel bearing - Type 2, 68>92
Part Number: 211-501-317
Oil seal for the rear wheel bearing. Two required per side (four required in total). Also used for splitscreen busses with IRS conversion.
£4.00 Each (inc VAT)
Spin UpSpin Down
more details on Rear torsion arm bushes - Type 2, >79
Rear torsion arm bushes - Type 2, >79
Part Number: 211-598-245
Rubber inner and outer rear torsion arm bushes for splitscreen and bay window vans. Supplied in a set of four.
£25.00 Per Set of 4 (inc VAT)
Spin UpSpin Down
more details on Bolt, oversize, shock absorber - Type 1, 63>65 & Type 2, 55>67
Bolt, oversize, shock absorber - Type 1, 63>65 & Type 2, 55>67
Part Number: 111-413-403/A

Oversize bolt to mount the top of the front shock absorber to the beam on 1963 to 1965 beetles. Also used to mount the top of the rear shock absorber on splitscreen busses from 1955 to 1967.

£7.00 Each (inc VAT)
Spin UpSpin Down
more details on Shock absorber, heavy duty - Various aircooled
Shock absorber, heavy duty - Various aircooled
Part Number: 111-513-031/HD
Heavy duty KYB Excel-G shock absorber for standard height vehicles or vehicles using drop spindles. These are well suited to splitscreen and bay window busses or the rear of smaller vehicles needing stiffer suspension.
Length = 265mm collapsed & 410mm extended

Suitable for:
Beetle & Karmann Ghia, front - up to 1965
Beetle & Karmann Ghia, rear - up to 1979
Splitscreen bus, front and rear - 1955 to 1967
Bay window bus, front and rear - 1968 to 1979
Type 3, front and rear - 1962 to 1973

Before ordering, please ensure that you have measured the size of the shock absorbers that you require. To find out the correct shock absorber for you, simply follow the below steps:
1.Remove your existing shock absorbers on both sides.
2.Lower the vehicle back on to its wheels and ensure the vehicle has settled.
3.Measure the distance between the centre of the two shock absorber mounting points.
4.Choose a shock absorber that your measurement is at least midway between the collapsed and extended measurement, there must be at least 2 inches of up and down movement from the normal ride height. (It is recommended that you allow 70% of downward movement and 30% of upward movement).

Please note: shock absorbers should always be replaced in pairs. Before fitting we also recommend collapsing and extending the shock absorber a few times in the correct position to remove bubbles that may have formed while in storage.
£62.50 Each (inc VAT)
Spin UpSpin Down
  • About us
  • Terms & conditions
  • Blog
  • How to find us
  • Privacy policy
  • Shows
  • Contact us
  • Price list
  • New parts coming soon
facebook twitter instagram

'Air Supply' Newsletter

Sign up for our regular newsletter 'Air Supply', for the latest news, updates and special offers from Auto Craft.

 
Copyright © 2007-2013 Auto Craft Engineering UK Ltd  |  VAT Reg: 896 143 490
Design and hosting by Spiral Sites