Part Number:
211-809-581
Outer sill below the cargo door, between the B Post and rear sill/wheel arch. Laser cut and pressed from 1mm mild steel.
Part Number:
211-809-591
The sill strengthener fits between the cargo door sill and the inner sill on all splitscreen busses up to 1967. Laser cut and pressed from 1mm mild steel.
Part Number:
214-809-101/X
Short sill between the rear wheel arch and cargo door opening on the left side of splitscreen busses (usually right hand drive vehicles) up to 1967. Approximately 200mm high.
Part Number:
211-809-102/X
Short sill between the rear wheel arch and cargo door opening on the right side of splitscreen busses (usually left hand drive vehicles) up to 1967. Approximately 200mm high.
Part Number:
211-809-101/XA
Long sill between rear wheel arch and cab door opening on the left side of splitscreen busses (usually left hand drive vehicles) up to 1967. 200 mm high, comes to approximately the height of the cargo floor.
Part Number:
211-809-101/XB
Long sill between the rear wheel arch and cab door opening on the left side of splitscreen busses (usually left hand drive vehicles) up to 1967. 350mm high, comes to approximately the height of the first horizontal rib on the inside of the side panel.
Part Number:
214-809-102/XA
Long sill between the rear wheel arch and cab door opening on the right side of splitscreen busses (usually right hand drive vehicles) up to 1967. 200mm high, comes to approximately the height of the cargo floor.
Part Number:
214-809-102/XB
Long sill between the rear wheel arch and cab door opening on the right side of splitscreen busses (usually right hand drive vehicles) up to 1967. 350mm high, comes to approximately the height of the first horizontal rib on the inside of the side panel.
Part Number:
211-801-393
Inner sill for left hand side of all splitscreen busses from 1950 to 1967. Laser cut and formed from 1.2mm steel.
Part Number:
211-801-394
Inner sill for righthand side of all splitscreen busses from 1950 to 1967. Laser cut and formed from 1.2mm steel.