Part Number:
211-813-355/A/F
Rear corner to the roof for the left side of splitscreen busses from 1955 to 1958. Comes with the hole for the rear light pre cut. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-813-356/A/F
Rear corner to the roof for the right side of splitscreen busses from 1955 to 1958. Comes with the hole for the rear light pre cut. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-813-355/B/F
Rear corner to the roof for the left side of splitscreen busses from 1958 to 1959. Comes with the hole for the rear light pre cut. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-813-356/B/F
Rear corner to the roof for the right side of splitscreen busses from 1958 to 1959. Comes with the hole for the rear light pre cut. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-813-355/C/F
Rear corner to the roof for the left side of splitscreen busses from 1959 to 1961. Comes with the hole for the rear light pre cut. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-813-356/C/F
Rear corner to the roof for the right side of splitscreen busses from 1959 to 1961. Comes with the hole for the rear light pre cut. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-813-355/D/F
Rear corner to the roof for the left side of splitscreen busses from 1961 to 1963. Comes with the hole for the rear light pre cut. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-813-356/D/F
Rear corner to the roof for the right side of splitscreen busses from 1961 to 1963. Comes with the hole for the rear light pre cut. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-813-355/X
250mm tall, left side bottom bowl repair for the rear corner on all years of Splitscreen van. Includes returns on the leading edge (against the side panel) and on the rear edge into the engine bay opening. Measurement is approximate, and taken from a horizontal line level with the bottom of the corner (not around the curve). Made by Wolfsburg West.
Part Number:
211-813-356/X
250mm tall right side bottom bowl repair for the rear corner on all years of Splitscreen van. Includes returns on the leading edge (against the side panel) and on the rear edge into the engine bay opening. Measurement is approximate, and taken from a horizontal line level with the bottom of the corner (not around the curve).
Part Number:
211-813-355
Rear corner to the swage line for the left side of splitscreen buses from 1955 to 1962. Made by Wolfsburg West.
Part Number:
211-813-356
Rear corner to the swage line for the right side of splitscreen busses from 1955 to 1962. Made by Wolfsburg West.
Part Number:
211-813-355/A
Rear corner to the swage line for the left side of splitscreen busses from 1963 to 1967. Made by Wolfsburg West.
Part Number:
211-813-356/A
Rear corner to the swage line for the right side of splitscreen busses from 1963 to 1967. Made by Wolfsburg West.
Part Number:
211-813-355/C
Rear corner to the roof for the left side of splitscreen buses from 1955 to 1962. Made by Wolfsburg West.
Part Number:
211-813-356/C
Rear corner to the roof for the right side of splitscreen buses from 1955 to 1962. Made by Wolfsburg West.
Part Number:
241-813-355
Rear corner to the roof for the left side of 15 and 23 window splitscreen buses with rear corner windows from 1955 to 1962. Made by Wolfsburg West.
Part Number:
241-813-356
Rear corner to the roof for the right side of 15 and 23 window splitscreen buses with rear corner windows from 1955 to 1962. Made by Wolfsburg West.
Part Number:
211-813-355/D
Rear corner to the roof for the left side of splitscreen buses from 1963 to 1967. Made by Wolfsburg West
Part Number:
211-813-356/D
Rear corner to the roof for the right side of splitscreen buses from 1963 to 1967. Made by Wolfsburg West
Part Number:
211-813-355/A/R
Repair panel for the rear light aperture. Fits the left side of splitscreen busses from 1957 to 1958.
Part Number:
211-813-356/A/R
Repair panel for the rear light aperture. Fits the right side of splitscreen busses from 1957 to 1958.
Part Number:
211-813-355/B/R
Repair panel for the rear light aperture. Fits the left side of splitscreen busses from 1959 to 1962.
Part Number:
211-813-356/B/R
Repair panel for the rear light aperture. Fits the right side of splitscreen busses from 1959 to 1962.
Part Number:
211-813-355/C/R
Repair panel for the rear light aperture. Fits the left side of splitscreen busses from 1963 to 1967 and bay window busses from 1968 to 1971.
Part Number:
211-813-356/C/R
Repair panel for the rear light aperture. Fits the right side of splitscreen busses from 1963 to 1967 and bay window busses from 1968 to 1971.
Part Number:
211-813-355/E/R
Repair panel for the rear light aperture with hole for reverse light. Fits the left side of splitscreen busses from 1963 to 1967 and bay window busses from 1968 to 1971.
Part Number:
211-813-356/E/R
Repair panel for the rear light aperture with hole for reverse light. Fits the right side of splitscreen busses from 1963 to 1967 and bay window busses from 1968 to 1971.
Part Number:
211-813-175
Complete rear valance for all barndoor splitscreen vans except pickups. For pickups use part number 211-813-175/A.
The valance has the larger depth top plate for early engine tinware, crank handle hole and no exhaust cut outs, all as per original.
Rear valances can be customized to allow fitting of non standard engines or exhausts see part number (
211-813-175/CUS), or to discuss your specific requirements, please email sales@autocrafteng.co.uk.
The fitting kit for this is availible through the following link,
Part Number:
211-813-175/A
Complete rear valance for splitscreen vans from March 1955 and pickups from 1950 to 1955 (barndoor) .
The valance has the larger depth top plate for early engine tinware, recessed engine lid latch plate, crank handle hole and no exhaust cut out, all as per original. The exact finish date for this item depends on original factory spec, but is correct up to at least June 1959 and used on certain vehicles up to 1962.
Rear valances can be customized to allow fitting of non standard engines or exhausts (see part number
211-813-175/CUS), or to discuss your specific requirements, please call or email us.
The fitting kit for this is availible through the following link,
Part Number:
211-813-175/B
Complete rear valance for splitscreen vans up to July 1965. The valance has the smaller depth top plate for late engine tinware, recessed engine lid latch plate, no crank handle hole and one exhaust cut out on the left, all as per original.
The exact start date for this item depends on original factory spec, but is correct on certain vehicles from at least June 1959 to July 1965.
Rear valances can be customized to allow fitting of non standard engines or exhausts (see part number
211-813-175/CUS), or to discuss your specific requirements, please call or email us.
The fitting kit for this is availible through the following link,
Part Number:
211-813-175/C
Complete rear valance for splitscreen vans from August 1965. The valance has the smaller depth top plate for late engine tinware, captive nuts for top mounted engine lid latch plate (non church key), no crank handle hole and one exhaust cut out on the left, all as per original.
Rear valances can be customized to allow fitting of non standard engines or exhausts (see part number
211-813-175/CUS), or to discuss your specific requirements, please call or email us.
The fitting kit for this is availible through the following link,
Part Number:
211-813-175/CUS
Various custom rear valances can be produced to allow the fitting of engines, exhausts and engine lids not originally intended for the vehicle. Numerous aspects of the rear valance changed over the years, including the depth of the top (for early and late engines) engine lid catch, crank handle hole and exhaust cut out. The majority of these changes can be combined to make a rear valance specific to your requirements. Additionally, the exhaust cut out, normally on the left can be placed in the centre, duplicated on the right for use with a beetle exhaust or left out completely. Other adaptations, including changes for non VW engine conversions may also be possible. When ordering, please email
sales@autocrafteng.co.uk for a custom valance checklist form that you can then email back to us with your specifications. For more information please call or email us.
The fitting kit for this is availible through the following link,
Part Number:
211-703-651
Rear valance bracket for the left side of splitscreen busses from 1955 to 1967.
Part Number:
211-703-652
Rear valance bracket for the right side of splitscreen busses from 1955 to 1967.
Part Number:
211-898-176
Complete fitting kit for the rear valance on all splitscreen vans. Supplied with two washers per main mounting bolt, a penny washer to protect the paint, and a serrated washer to avoid engine vibration loosening the mounting bolts.
See below for a full list of contents.
Part Number:
211-827-025/B/WW
Complete engine lid for all Split Screen vans from 1959 to 1965. Manufactured by Wolfsburg West, we felt this otherwise excellent part suffered from a slight lack of finishing in the number of spotwelds securing the inner and outer panels together, so we clean back every part and add a significant number of spotwelds to tie the 2 panels more firmly together. We believe we are the only company offering this service.
Part Number:
211-827-025/G
Complete engine lid for splitscreen busses from 1958 to 1963. This is made in the same thickness steel as original and coated in a weld through primer.
Part Number:
211-827-025/E
Complete engine lid for splitscreen busses from 1963 to 1966. This is made from the same thickness steel as original and coated in a weld through primer.
Part Number:
211-813-167
Side tray panel for the left side of the engine bay on splitscreen busses up to 1967. The panel is supplied with the retaining strip for the engine bay seal already spot welded on.
Part Number:
211-813-168
Side tray panel for the right side of the engine bay on splitscreen busses up to 1967. The panel is supplied with the retaining strip for the engine bay seal already spot welded on.
Part Number:
111-813-157
335mm section of rubber seal retaining strip for all beetle engine bay side trays up to 1974, Splitscreen bus engine bays up to 1967 and most other aircooled vw's.
Part Number:
211-801-581/A
Inner web bracket for the left side of the engine bay on splitscreen busses up to 1967.
Part Number:
211-801-574/A
Inner web bracket for the right side of the engine bay on splitscreen busses up to 1967.
Part Number:
211-801-581/B
Outer web bracket for the left side of the engine bay on splitscreen busses up to 1967.
Part Number:
211-801-574/B
Outer web bracket for the right side of the engine bay on splitscreen busses up to 1967.
Part Number:
111-813-155
940 mm section of rubber seal retaining strip for all beetle engine bays up to 1974, Splitscreen bus engine bays up to 1967 and most other aircooled vw's.
Part Number:
211-807-515
Platform tray for the left side of the engine bay on 1950 to 1955 (barndoor) busses.
Part Number:
211-813-163/GAS
Gas bottle tray for the left side of the engine bay on splitscreen busses from 1955 to 1967.
Part Number:
211-813-163
Battery tray for the left side of splitscreen busses from 1955 to 1967. This can be used as a replacement for a rotten gas bottle tray or for securely fitting a leisure battery.
Part Number:
211-813-164
Battery tray for the right side of the engine bay on splitscreen busses from 1955 to 1967.
Part Number:
131-915-303
Spring clip style metal battery strap for early bugs and most post barndoor Split Screen vans.
Part Number:
131-915-313
Battery securing clamp - see below for specific vehicle suitability.
Part Number:
211-813-225
Inner reinforcement panel for the engine lid hinge panel in between the engine lid and tailgate. Supplied in a weld thru primer.
Part Number:
211-813-227/D
Panel between the engine lid and rear hatch that the engine lid hinges mount to. This is correct for all splitscreen busses from 1966 to 1967 and Early bay window busses from 1968 to 1972. The retaining strip for the engine lid seal is available separately as this is a separate part as standard.
Part Number:
211-813-417/200
Approximately 175mm tall left side D post inner repair panel. This panel mounts inside the rear corner to make the D post box section and engine lid seal lip on all narrow hatch busses and pickups.
See part number
261-813-417 for full height pick up specific D post.
Part Number:
211-813-417/370
Approximately 370mm tall left side D post inner repair panel. This panel mounts inside the rear corner to make the D post box section and engine lid seal lip on all narrow hatch busses and pickups.
See part number
261-813-417 for full height pick up specific D post.
Part Number:
211-813-418/200
Approximately 175mm tall right side D post inner repair panel. This panel mounts inside the rear corner to make the D post box section and engine lid seal lip on all narrow hatch busses and pickups.
See part number
261-813-418 for full height pick up specific D post.
Part Number:
211-813-418/370
Approximately 370mm tall right side D post inner repair panel. This panel mounts inside the rear corner to make the D post box section and engine lid seal lip on all narrow hatch busses and pickups.
See part number
261-813-418 for full height pick up specific D post.
Part Number:
211-813-417/RS
Seal retaining strip for the engine lid and treasure chest door. Fits splitscreen busses from 1955 to 1967 and Bay window busses from 1968 to 1979.
Part Number:
211-829-105/Y
Outer skin repair panel for the rear hatch/tailgate on splitscreen busses from 1955 to 1960.
Part Number:
211-829-105/X
Outer repair panel for the tailgate with a crescent pressing, normally splitscreen busses from 1960 to 1963.
Part Number:
211-829-105/Z
Outer skin repair panel for the rear hatch/tailgate on splitscreen busses from 1963 to 1967.
Part Number:
211-829-105
Complete rear hatch for splitscreen vans from 1955 to 1963 with a small rear window. Includes hinge. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
241-829-105
Complete rear hatch for deluxe model splitscreen vans from 1955 to 1963. Includes hinge.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-829-105/Q
Complete rear hatch for splitscreen vans from 1963 to 1966. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-707-335
Rear left bumper bracket for splitscreen busses up to 1958 fitted with ribbed bumpers.
Part Number:
211-707-336
Rear right bumper bracket for splitscreen busses up to 1958 with ribbed bumpers.
Part Number:
211-707-335/A
Rear bumper bracket for splitscreen busses from 1958 to 1967 with slash cut and diamond cut bumpers. Fits left and right side, two required per vehicle.
Part Number:
211-707-361/C
Left side splash pan (leaf panel) for the rear bumper on all 1958 and later split screen busses, except pickups.
See
261-707-361 for up to 1958 splitscreen pickups.
Requires fitting kit, available separately -
click here for details.
Part Number:
211-707-362/C
Right side splash pan (leaf panel) for the rear bumper on all 1958 and later splitscreen busses, except pickups.
See
261-707-362 for pre 1958 splitscreen pickups.
Requires fitting kit available separately -
click here for details.
Part Number:
211-813-247
Spare wheel well for the floor above the engine bay, usually on walk through model splitscreen busses from 1955 to 1967 but is used on some other models also.