Part Number:
211-809-201/RRR
500mm tall repair section for door seal retaining strip on the left side A post on splitscreen busses.
Part Number:
211-809-202/RRR
500mm tall repair section for door seal retaining strip on the right side A post on splitscreen busses.
Part Number:
211-809-201/Z
Left side A post repair panel. Height to below the bottom of the hinge. Laser cut and CNC folded in 1mm steel, fits all splitscreen busses from 1950 to 1967.
If the inner front valance is also being replaced, the A post valance bracket will also be required (part number 211-809-203) as shown in picture 3.
Part Number:
211-809-201/250
Left side A post repair panel for splitscreen busses. The panel is approximately 250mm tall and includes the hinge bracket.
Part Number:
211-809-201/B
Complete, left side, A pillar for splitscreen busses from 1955 to 1967. Panel comes complete with both hinge brackets and channel for the seal spot welded in place. Comes coated in a weld through primer.
Part Number:
211-809-202/Z
Right side A post repair panel. Height to below the bottom hinge. Laser cut and CNC folded in 1mm steel, fits all splitscreen busses from 1950 to 1967.
If the inner front valance is also being replaced, the A post valance bracket will also be required (part number 211-809-204) as shown in picture 3.
Part Number:
211-809-202/250
Right side A post repair panel for splitscreen busses. The panel is approximately 250mm tall and includes the hinge bracket.
Part Number:
211-809-202/B
Complete, right side, A pillar for splitscreen busses from 1955 to 1967. Panel comes complete with both hinge brackets and channel for the seal spot welded in place. Comes coated in a weld through primer.
Part Number:
211-809-203
A post valance bracket for all splitscreen busses from 1950 to 1967. Bridges between the A post and the end of the inner front valance, also closes off the bottom of the A post. Normally required if either the inner front valance or the A post are being replaced.
Part Number:
211-809-204
A post valance bracket for all splitscreen busses from 1950 to 1967. Bridges between the A post and the end of the inner front valance, and also closes off the bottom of the A post. Normally required if either the inner front valance or the A post are being replaced.
Part Number:
214-809-253/200
Inner repair section for the B post between the cab door and cargo door. Correct for right hand drive busses, Double cab pickups with cargo doors on the left, and for Double Door Busses. Not suitable for Single cab pickups.
Part Number:
211-809-254/200
Inner repair section for the B post between the cab door and cargo door. Correct for left hand drive busses, Double cab pickups with cargo doors on the right, and for Double Door Busses. Not suitable for Single cab pickups.
Part Number:
211-809-251/225
Inner repair section for the B post behind the cab door on the left side of splitscreen busses. Correct for standard left hand drive vehicles and left hand drive double cab pickups, but not suitable for Single Cab Pickups.
Part Number:
214-809-252/225
Inner repair section for the B post behind the cab door on the right side of splitscreen busses. Correct for standard right hand drive vehicles and right hand drive double cab pickups, but not suitable for Single Cab Pickups.
Part Number:
214-809-251/200
200mm tall B post outer skin repair panel. Goes between the cab door and cargo door on right hand drive splitscreen busses from 1955 to 1967.
Part Number:
211-809-252/200
200mm tall B post outer skin repair panel. Goes between the cab door and cargo door on left hand drive splitscreen busses 1955 to 1967.
Part Number:
214-809-251/400
400mm tall B post outer skin repair panel including captive hinge plate for lower cargo door hinge. Goes between the cab door and cargo door on right hand drive splitscreen busses from 1955 to 1967.
Part Number:
211-809-252/400
400mm tall B post outer skin repair panel including captive hinge plate for lower cargo door hinge. Goes between the cab door and cargo door on left hand drive splitscreen busses 1955 to 1967.
Part Number:
214-809-251/840
840mm tall B post outer skin repair panel, up to the swage line, including captive hinge plate for lower cargo door hinge. Goes between the cab door and cargo door on right hand drive splitscreen busses from 1955 to 1967.
Part Number:
211-809-252/840
840mm tall B post outer skin repair panel, up to the swage line, including captive hinge plate for lower cargo door hinge. Goes between the cab door and cargo door on left hand drive splitscreen busses 1955 to 1967.
Part Number:
211-809-291
Lower cargo door hinge carrier plate for the inside of the B post on splitscreen busses up to 1967.
Part Number:
244-809-321/200
200mm tall inner repair section for C post behind cargo doors on the left side of the vehicle. Correct for standard right hand drive or double door vehicles.
Part Number:
241-809-322/200
200mm tall inner repair section for the C post, behind the cargo doors on the right side of the vehicle. Correct for standard left hand drive or Double Door vehicles.
Part Number:
244-809-321/370
370mm tall inner repair section for the C post, behind the cargo doors including captive plate for lower hinge (not pictured). Fits the left side of the vehicle, correct for standard right hand drive or Double Door vehicles.
Part Number:
241-809-322/370
370mm tall inner repair section for the C post, behind the cargo doors including captive plate for lower hinge (not pictured). Fits the right side of the vehicle, correct for standard left hand drive or Double Door vehicles.
Part Number:
244-809-321/800
800mm tall (to the swage line) inner repair section for the C post behind the cargo doors on the left side of the vehicle. Correct for standard right hand drive or double door vehicles.
Part Number:
241-809-322/800
800mm tall (up to the swage line) inner repair section for the C post behind the cargo doors on the right side of the vehicle. Correct for standard Left Hand Drive or Double Door vehicles.
Part Number:
244-809-321/C
Full height inner repair section for the C post behind the cargo doors on the left side of the vehicle. Correct for standard right hand drive or double door vehicles. Full height without top hinge holes or bracket for universal fitting.
Part Number:
241-809-322/C
Inner repair section for the C post behind the cargo doors on the right side of the vehicle. Correct for standard left hand drive or Double Door vehicles. Full height without top hinge holes or bracket for universal fitting.
Part Number:
211-813-417/200
Approximately 175mm tall left side D post inner repair panel. This panel mounts inside the rear corner to make the D post box section and engine lid seal lip on all narrow hatch busses and pickups.
See part number
261-813-417 for full height pick up specific D post.
Part Number:
211-813-417/370
Approximately 370mm tall left side D post inner repair panel. This panel mounts inside the rear corner to make the D post box section and engine lid seal lip on all narrow hatch busses and pickups.
See part number
261-813-417 for full height pick up specific D post.
Part Number:
211-813-418/200
Approximately 175mm tall right side D post inner repair panel. This panel mounts inside the rear corner to make the D post box section and engine lid seal lip on all narrow hatch busses and pickups.
See part number
261-813-418 for full height pick up specific D post.
Part Number:
211-813-418/370
Approximately 370mm tall right side D post inner repair panel. This panel mounts inside the rear corner to make the D post box section and engine lid seal lip on all narrow hatch busses and pickups.
See part number
261-813-418 for full height pick up specific D post.
Part Number:
211-813-417/RS
Seal retaining strip for the engine lid and treasure chest door. Fits splitscreen busses from 1955 to 1967 and Bay window busses from 1968 to 1979.
Part Number:
211-809-311/180
Side panel vertical inner strengthening panel. 180mm tall repair panel, laser cut and pressed from 1mm mild steel.
Part Number:
211-809-311/300
300mm tall repair panel for the inner, vertical strengthener on the side panels. Laser cut and pressed in house from 1mm mild steel.
Part Number:
211-809-311/A
Full height repair panel for the inner, vertical strengthener on the side panels.
Part Number:
211-809-341/A
Full height repair panel for the inner, vertical strengthener on the rear left of the side panels. This strengthener sits behind the rear side window on the left side of the vehicle.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-809-342/A
Full height repair panel for the inner, vertical strengthener on the rear right of the side panels. This strengthener sits behind the rear side window on the right side of the vehicle.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-809-181/A
Small top hat horizontal side panel strengthening member.
This smaller profile is used for all the horizontal spars on Barndoor vans, the top of the 3 horizontal spars on lower side panels on post Barndoors, and the single spar on panel van upper side panels for all years.
VW supplied this part in 2.4m lengths to be cut to fit numerous applications, detailed below.
- Panel van, long upper side panel, 1950 to 1967, Full length (2400mm)
- Panel van, short upper side panel, 1950 to 1967 - 1110mm
- Short lower side panel, up to 1955 - 2 x 730mm
- Short lower side panel, 1955 to 1967 - 590mm
- Long lower side panel, top up to 1955 - 2 x 1970mm
- Long lower side panel,bottom up to 1955 - 1236mm
- Long lower side panel, 1955 to 1967 - 1830mm
Part Number:
211-809-187
Tall top hat horizontal side panel strengthening member.
This taller profile is used for the bottom 2 of the 3 horizontal spars on lower side panels on post Barndoor vans.
Supplied in 1.9m lengths to be cut to fit numerous applications.
Part Number:
211-801-081/A
Complete bulkhead panel for splitscreen busses from 1955 to 1962. This is sometimes known as the rising sun bulkhead. The bulkhead on vehicles from 1963 and onwards the sun sits higher and has reinforcement webs pointing downwards too.