Part Number: 211-805-031/X
Nose repair section for all years of split screen. Made from 1mm mild steel.
Part Number:
211-805-031/50
Front panel repair, 50mm high, includes nose detail. Full width including return to fold around A Post and bottom return to attach to valance. Made from 1mm steel. Fits splitscreen busses from 1950 to 1967.
Part Number:
211-805-031/100
Front panel repair, 100mm high, includes nose detail. Full width including return to fold around A Post and bottom return to attach to valance. Made from 1mm steel. Fits splitscreen busses from 1950 to 1967.
Part Number:
211-805-031/200
Front panel repair, 200mm high, includes nose detail. Full width including return to fold around A Post and bottom return to attach to valance. Made from 1mm steel. Fits all splitscreen busses from 1950 to 1967.
Part Number:
211-805-031/350
Front panel repair panel, 350mm high, includes nose detail and bottom half of headlamp apertures. Full width including return to fold around A Post and bottom return to attach to valance. Made from 1mm steel. Fits splitscreen busses from 1950 to 1967.
Part Number:
211-805-031/500
Approximately 500mm tall repair panel for the front panel, includes the nose detail and headlamp apertures. Full width including return to fold around A Post and bottom return to attach to valance. Made from 1mm steel. Fits splitscreen busses from 1950 to 1967.
.jpg&w=200)
Part Number:
211-805-035/B
Front panel for splitscreen busses from 1955 to 1959.
Part Number:
211-805-035/C
Front panel for splitscreen busses from 1959 to 1963.
Part Number:
211-805-035/D
Front panel for splitscreen busses from 1963 to 1967.
Part Number:
211-805-051/MDashboard for left hand drive splitscreens 1955>1961.
Will fit later vehicles however the shape of the speedo pod is different.
Part Number:
214-805-051/MDashboard for right hand drive splitscreens 1955>1961.
Will fit later vehicles however the shape of the speedo pod is different.
Part Number:
211-805-333
Inner headlight support panel for left hand drive and right hand drive Splitscreen vans from 1955 to 1967. These are much better than other panels currently on the market. This panel will also fit Barndoor busses (1950 to 1955) but one rib is different to original.
Part Number:
211-805-291
Front cross member for the front panel and dashboard support. Fits left hand drive splitscreen busses from 1955 to 1960 but can be modified to fit later vehicles. Supplied in a weld thru primer.
Part Number:
211-805-207
Parcel shelf for under the dashboard on left hand drive splitscreen vans from 1955 to 1961. Supplied in weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-821-137
Mounting plate for repair or retro fitting of bullet indicators on splitscreen front panels.
Part Number:
211-805-265/B/WW
Steel headlight bowl with the correct shape for splitscreen vans up to 1963. While the shape is not correct this can also be used for vans from 1963 to 1967.
Part Number:
211-805-265/B
Steel headlight bowl with the correct shape for splitscreen vans from 1963 to 1967. Coated in a weld thru primer.
Part Number:
211-805-039/L
Bottom repair section for left hand side of the front screen, includes wiper detail and bottom corners. Fits all splitscreen busses from 1950 to 1967. Made from 1mm thick steel.
Part Number:
211-805-039/R
Bottom repair section for the right hand side of the front screen, includes wiper detail and bottom corners. Fits all splitscreen busses from 1950 to 1967. Made from 1mm thick steel.
Part Number:
211-805-039/H
Half repair for front window screen surround, includes wiper detail and all returned edges in 1mm steel. Fits splitscreen busses from 1955 to 1967.
Part Number:
211-805-039/F
Complete front window screen surround, includes details for wiper spindles, recesses in top edge for safari hinges and all correct returned edges. Fits splitscreen busses from 1955 to 1967.
Part Number:
211-703-073/Z
Outer front valance, made from 1.2mm steel and including bumper bracket holes. Fits below the front panel. This panel should be used if the bottom of the front panel and/or the inner front valance are not being replaced. If the bottom of the front panel and/or the inner front valance are being replaced use our taller front valance repair panel, part number 211-703-073/A.
Part Number:
211-703-073/A
Outer front valance, made from 1.2mm steel and including bumper bracket holes. Fits below and behind the front panel. This panel is made as per the original design, and should be used if replacing the bottom of the front panel and/or the inner front valance. If only the outer valance is to be replaced, use our smaller front valance repair panel, part number 211-703-073/Z.
Part Number:
211-703-071/B
Complete inner front valance for all left hand drive splitscreen busses.
Part Number:
214-703-071/A
Inner front valance for all right hand drive splitscreen busses up to 1967.
Part Number:
211-809-203
A post valance bracket for all splitscreen busses from 1950 to 1967. Bridges between the A post and the end of the inner front valance, also closes off the bottom of the A post. Normally required if either the inner front valance or the A post are being replaced.
Part Number:
211-809-204
A post valance bracket for all splitscreen busses from 1950 to 1967. Bridges between the A post and the end of the inner front valance, and also closes off the bottom of the A post. Normally required if either the inner front valance or the A post are being replaced.
Part Number:
211-809-201/Z
Left side A post repair panel. Height to below the bottom of the hinge. Laser cut and CNC folded in 1mm steel, fits all splitscreen busses from 1950 to 1967.
If the inner front valance is also being replaced, the A post valance bracket will also be required (part number 211-809-203) as shown in picture 3.
Part Number:
211-809-201/250
Left side A post repair panel for splitscreen busses. The panel is approximately 250mm tall and includes the hinge bracket.
Part Number:
211-809-201/B
Complete, left side, A pillar for splitscreen busses from 1955 to 1963. Panel comes complete with both hinge brackets and channel for the seal spot welded in place. Comes coated in a weld through primer.
Part Number:
211-809-201/C
Complete, left side, A pillar for splitscreen busses from 1963 to 1967. Panel comes complete with both hinge brackets and channel for the seal spot welded in place. Comes coated in a weld through primer.
Part Number:
211-809-202/Z
Right side A post repair panel. Height to below the bottom hinge. Laser cut and CNC folded in 1mm steel, fits all splitscreen busses from 1950 to 1967.
If the inner front valance is also being replaced, the A post valance bracket will also be required (part number 211-809-204) as shown in picture 3.
Part Number:
211-809-202/250
Right side A post repair panel for splitscreen busses. The panel is approximately 250mm tall and includes the hinge bracket.
Part Number:
211-809-202/B
Complete, right side, A pillar for splitscreen busses from 1955 to 1963. Panel comes complete with both hinge brackets and channel for the seal spot welded in place. Comes coated in a weld through primer.
Part Number: 211-809-202/C
Complete, right side, A pillar for splitscreen busses from 1963 to 1967. Panel comes complete with both hinge brackets and channel for the seal spot welded in place. Comes coated in a weld through primer.
Part Number:
211-809-201/RRR
500mm tall repair section for door seal retaining strip on the left side A post on splitscreen busses.
Part Number:
211-809-202/RRR
500mm tall repair section for door seal retaining strip on the right side A post on splitscreen busses.
Part Number:
211-801-051/B
Complete cab floor panel for left hand drive splitscreen busses from 1955 to 1958. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
214-801-051/B
Complete cab floor panel for right hand drive splitscreen busses from 1955 to 1958. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-801-051/H
Complete cab floor panel for right hand drive splitscreen busses from 1959 to 1967. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
214-801-051/E
Complete cab floor panel for right hand drive splitscreen busses from 1959 to 1967. Supplied in a weld thru primer.
***Special order item: Please allow up to 14 days for delivery within the UK***
Part Number:
211-801-051/H/WW
Full cab floor replacement panel for left hand drive split screen busses from 1959 to 1967. Manufactured by Wolfsburg West in the USA.
Part Number:
211-801-055/H
Centre section of cab floor panel for left hand drive split screen busses from 1959 to 1967. Manufactured by Wolfsburg West in USA.
Part Number:
211-703-045/AComplete floor repair under the tool box between front seat and mounting panels.
Supplied in a weld thru primer.
***Special order item: Please allow up to 14-28 days for delivery within the UK***
Part Number:
211-801-317
Repair section for the outer left side of the cab floor including all pressing details. Supplied without holes so it can be used for left or right hand drive vehicles. Pressed and formed in house in 1mm thick steel.
Part Number:
211-801-318
Repair section for outer right side of cab floor, including all pressing details. Supplied without holes so can be used for Left or right hand drive vehicles. Pressed and formed in 1mm steel.
Part Number:
211-801-337
Cover plate for the brake reservoir access hole in split screen bus cab floors.
Part Number:
214-703-609/A
Cover plate/pedal pan for under the pedal linkage on splitscreen vans from 1955 to 1967. This cover comes without any cutouts so can be used for left or right hand drive vehicles.
Part Number:
211-703-609/B
Cover plate/pedal pan for under the pedal linkage on left hand drive splitscreen vans from 1955 to 1967. May require a small modification to fit vehicles using factory dual circuit brakes.
Part Number:
N 12 080 1
Clip to attach the front badge to the inner panel on Split Screen vans. Priced individually, also available as a set of 4 (see below).
Part Number:
N 12 080 1/SET
Clips to attach the front badge to the inner panel on Split Screen vans, supplied as set of 4.
Part Number:
211-853-611/A
Rubber spacer for front VW Badge. Priced individually, also available as a set of 4 (see below).
Part Number:
211-853-611/A/SET
Set of 4 front badge rubber spacers for the large front 'VW' badge.
Part Number:
211-707-125
Front left bumper bracket for Splitscreen busses up to 1955 (barndoor). Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-126
Front right bumper bracket for Splitscreen busses up to 1955 (barndoor). Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-135/A
Front left bumper bracket for splitscreen busses with ribbed bumpers from 1955 to 1958. Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-136/A
Front right bumper bracket for splitscreen busses with ribbed bumpers from 1955 to 1958. Laser cut and formed in house from 3mm mild steel.
Part Number:
211-798-135/A
Fitting kit to mount both of the front bumper brackets to the chassis on splitscreen busses from 1955 to 1958.
Part Number:
211-707-135/B
Front left bumper bracket for splitscreen busses with diamond/slash cut bumper from 1958 to 1967. Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-136/B
Front right bumper bracket for splitscreen busses with diamond/slash cut bumpers. Laser cut and formed in house from 3mm mild steel.
Part Number:
211-801-081/A
Complete bulkhead panel for splitscreen busses from 1955 to 1962. This is sometimes known as the rising sun bulkhead. The bulkhead on vehicles from 1963 and onwards the sun sits higher and has reinforcement webs pointing downwards too.
Part Number: 221-867-737/A
Top bulkhead cover plate for splitscreen from 1955>1967