Part Number:
211-707-105/D
Front bumper blade without holes for overriders on euro spec Split Screen vans from 1958 to 1967.
Part Number:
213-798-105/B
Complete US spec front bumper including overriders, towel rails and fitting kit. All holes for towel rail/overrider mounting are pre drilled in the main bumper blade.
Includes the following items:
Part Number:
211-798-105/D
Fitting kit to mount the front bumper blade to the bumper brackets and wheel arch support on splitscreen busses from 1958 to 1967.
Part Number:
213-707-155/A
Single overrider for US spec front bumpers, fits left or right side.
Part Number:
213-707-225
Pair of spacing tubes (or distance tubes) for front overriders on US spec bumpers.
Part Number:
213-707-177
Towel rail/bow for US spec front bumpers.
Part Number:
213-707-195
Pair of fitting washers to mount the towel rail/bow for US spec front or rear bumpers. One pair required per bumper.
Part Number:
211-798-002
Stainless steel bolt kit for US spec front bumper. Includes all fitting hardware to assemble and mount the bumper, towel rail and overriders.
Part Number:
111-707-999
One pair of clamp on number plate mounts. Can be used on most air cooled vehicles, usually to mount the number plate on to the front bumper.
Part Number:
211-707-125
Front left bumper bracket for Splitscreen busses up to 1955 (barndoor). Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-126
Front right bumper bracket for Splitscreen busses up to 1955 (barndoor). Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-135/A
Front left bumper bracket for splitscreen busses with ribbed bumpers from 1955 to 1958. Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-136/A
Front right bumper bracket for splitscreen busses with ribbed bumpers from 1955 to 1958. Laser cut and formed in house from 3mm mild steel.
Part Number:
211-798-135/A
Fitting kit to mount both of the front bumper brackets to the chassis on splitscreen busses from 1955 to 1958.
Part Number:
211-707-135/B
Front left bumper bracket for splitscreen busses with diamond/slash cut bumper from 1958 to 1967. Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-136/B
Front right bumper bracket for splitscreen busses with diamond/slash cut bumpers. Laser cut and formed in house from 3mm mild steel.
Part Number:
211-707-292
The small outer bumper support bracket to be welded on the bottom of the front wheel arch to support the outer edge of the front bumper. Fits all splitscreen busses from 1950 to 1967.
Part Number:
211-707-305/B
Rear bumper without holes for overriders, for euro spec Split Screen vans from 1958 to 1967. Made by Wolfsburg West.
Part Number:
211-707-305/A
Heavy gauge rear bumper blade, finished in white powder coat. This is correct for 1959 to 1965 Split Screen vans (except pick ups), but will also fit 1966 to 1967 busses without modification. Can also be fitted to Early Bay Window busses with minor modification.
Part Number:
213-798-305/A
Complete US spec rear bumper including overriders, towel rails and fitting kit.
Includes the following items
Part Number:
213-707-355/A
Left side overrider for US spec rear bumpers.
Part Number:
213-707-356/A
Right side overrider for US spec rear bumpers.
Part Number:
213-707-425
Pair of spacing tubes (or distance tubes) for rear overriders on US spec bumpers.
Part Number:
263-707-385
Left side towel rail/bow for US spec rear bumpers.
Part Number:
263-707-386
Right side towel rail/bow for US spec rear bumpers.
Part Number:
211-798-003
Stainless steel bolt kit for US spec rear bumpers. Includes all fitting hardware to assemble and mount the bumper, towel rails and overriders.
Part Number:
211-707-335
Rear left bumper bracket for splitscreen busses up to 1958 fitted with ribbed bumpers.
Part Number:
211-707-336
Rear right bumper bracket for splitscreen busses up to 1958 with ribbed bumpers.
Part Number:
211-707-335/A
Rear bumper bracket for splitscreen busses from 1958 to 1967 with slash cut and diamond cut bumpers. Fits left and right side, two required per vehicle.
Part Number:
211-707-361/C
Left side splash pan (leaf panel) for the rear bumper on all 1958 and later split screen busses, except pickups.
See
261-707-361 for up to 1958 splitscreen pickups.
Requires fitting kit, available separately -
click here for details.
Part Number:
211-707-362/C
Right side splash pan (leaf panel) for the rear bumper on all 1958 and later splitscreen busses, except pickups.
See
261-707-362 for pre 1958 splitscreen pickups.
Requires fitting kit available separately -
click here for details.
Part Number:
211-798-005
Full fitting kit for one pair of splash pans on split screen vans from 1959 to 1967. Includes all the necessary hardware and seals.
Part Number:
211-707-397/A
Pair of seals for rear bumper splash pans on splitscreen busses from 1959 to 1967.
Part Number:
211-707-345/PR
Left and right reinforcement plates for rear bumper splash pans.
Part Number:
213-707-666
Pair of splash pan to bumper bracket pads.
Part Number:
241-707-000
Rubber insert for deluxe bumper trim on 1958 to 1967 splitscreen busses. Sold by the meter and will require cutting to length.
Part Number:
113-707-191/CS
25mm long M8 stainless steel bumper bolt, with domed coach head.