Part Number:
211-798-121/EMP
Aftermarket quick shift gearstick kit, for Split Screen vans from 1959 to 1967 and all Bay Window vans. Significantly improves the feel and responsiveness of the gear change.
Part Number:
211-711-078
Gear lever extension for splitscreen vehicles, extends the position of the gear knob up and back towards the driver. Standard M10 screw fitting with shallow locking nut to allow the desired orientation to be achieved. Gear knob available separately.
Part Number: 211-798-149/EMP
Simple, cheap and effective way to tighten up the gear selection of your stock aircooled VW gearstick. These kits have been going for over 30 years, and are still very popular. Fitting simply requires removal of the gearstick (2 bolts) to fit the 'diamond' spacer, and removing the gear knob and sliding the collar over the gearstick itself. The result is up to a 40% reduction in throw.
Part Number:
113-711-141/BLBlack gear stick knob with 10mm thread, fits splitscreen vans up to 1967 and beetles up to 1960.
Part Number:
113-711-141/GRGrey gear stick knob with 10mm thread, fits splitscreen vans up to 1967 and beetles up to 1960.
Part Number:
113-711-141/IVIvory gear stick knob, fits splitscreen vans up to 1967 and beetles up to 1960.
Part Number:
113-711-141/BK/10MM
Black gearstick knob with white shift pattern and 10mm thread.
Part Number:
113-711-141/IV/10MM
Ivory gearstick knob with black shift pattern and 10mm thread.
Part Number:
111-711-115/A
Rubber boot for the base of the gearstick lever on all splitscreen and bay window vans. Also fits Beetles from 1960 to 1979 and Karmann Ghias from 1955 to 1974.
Part Number:
211-711-145/A
Gearstick lever tensioning spring inside the gearstick ball housing cover.
Part Number:
211-711-149
Gearstick selector plate for splitscreen and bay window vans.
Part Number:
111-701-255/B
Gear shift rod guide plate/bottom gear lever mounting plate. See below for various fitting uses.
Part Number:
111-798-105
Bolts and washer set for mounting the gearstick.
Part Number:
N-10-242-5
M8 x 25mm A2-70 (304 Grade) stainless steel bolt for the gearshift lever. Two required per vehicle.
Part Number:
N-12-228-2
M8 wave spring washer for gearstick mounting in A2-70 (304 grade) stainless steel. Two required per vehicle. Made to DIN 137 B standard.
Part Number:
N-11-525-2
M8 washer for gearstick mounting in A2-70 (304 grade) stainless steel. Two required per vehicle.