Part Number:
111-198-600
Forged 69.5mm counter weighted and balanced crankshaft for performance 25 & 30 horse power engines. Manufactured from 4340 steel alloy with SPG pattern eight dowel flywheel interface and connecting rod & main bearing journals nitride hardened to HV 500. Supplied with dowels, pushrod spacers and paper flywheel gaskets.
Part Number:
070-105-101
Brand new 69mm cross drilled crankshaft. Supplied with four dowels for flywheel mounting.
Part Number:
113-105-219
Crank gear spacer, fitted between the cam gear and the distributor drive gear.
Part Number:
113-105-251/G
Standard crankshaft pulley wheel for all air cooled engines from 1963 and onwards.
Part Number:
111-105-263/A
Bottom pulley bolt for the crankshaft on 1200cc to 1600cc engines.
Part Number:
111-105-263/A/CHR
Chrome plated bolt and washer for the bottom crankshaft pulley on most aircooled VW engines. Supplied in the standard 19mm length.
Part Number:
111-105-353
Billet aluminium crankshaft pulley wheel finished with a black degree ring around the outside. Pulley wheel is the same diameter as original.
Part Number:
111-059-118
Extra long crankshaft pulley bolt for use with press in sand seal.
Part Number:
113-105-249
Woodruff key for the crankshaft pulley wheel.
Part Number:
113-105-241/A
Crankshaft/crank pulley oil thrower ring for various aircooled engines.
Part Number:
111-105-209
Crankshaft timing gear for all 25 & 30 horse power engines.
Part Number:
113-105-209
Crankshaft timing gear for most Type 1 and type 3 based air-cooled engines except 25 & 30 horsepower engines.
Part Number:
111-105-213
Woodruff key for the crankshaft timing gear on most air cooled engines.
Part Number:
111-105-313/A
Needle bearing for the main crankshaft bolt for most air cooled VW engines.
Part Number:
111-105-279/AOK
One pair of 0.2mm thick crankshaft to flywheel gaskets to fit 69.5mm 30 horse power crankshaft.
Part Number:
113-105-281/A
0.24mm thick end float shim for engines made after 1966 only.
Part Number:
113-105-283/A
0.30mm thick end float shim for engines made after 1966 only.
Part Number:
113-105-285/A
0.32mm thick end float shim for engines made after 1966 only.
Part Number:
113-105-287/A
0.34mm thick end float shim for engines made after 1966 only.
Part Number:
113-105-289/A
0.36mm thick end float shim for engines made after 1966 only.
Part Number:
311-105-401/B
Set of four standard con rods for 1300cc to 1600cc engines. Big end bearings not included.
Part Number:
113-105-425/B
M9 thread, non stretching press in connecting rod bolt.
Part Number:
113-105-427
M9 connecting rod nut for all 1300cc to 1600cc type 1 engines and 1700cc to 2000cc type 4 engines.
Part Number:
311-105-431/A
Set of four standard small end bushes for 1300cc to 1600cc engines.
Part Number:
113-105-701
Standard size con rod big end bearing set for brand new un-ground crankshafts.
Part Number:
113-105-707
Con rod big end bearing set. 0.25mm undersized inner diameter for reground crankshaft con rod journals.
Part Number:
113-105-713
Con rod big end bearing set. 0.5mm undersized inner diameter for reground crankshaft con rod journals.
Part Number:
113-105-719
Con rod big end bearing set. 0.75mm undersized inner diameter for reground crankshaft con rod journals.
Part Number:
113-105-725
Con rod big end bearing set. 1mm undersized inner diameter for reground crankshaft con rod journals.
Part Number:
311-105-271
Standard flywheel for 200mm clutches 12 volt vehicles. Drilled for four dowel pins.
Part Number:
311-105-273/LSP
Lightened fly wheel weighing 12.5lbs for use with a 200mm clutch. Drilled for eight dowel pins for use on aftermarket crankshafts on performance engines.
Part Number:
111-105-297
Washer for the flywheel gland nut on most air cooled VW engines.
Part Number:
111-105-305/E
Flywheel gland nut for most air cooled engines except 25 & and 30 horse power engines.
Part Number:
311-105-295/A
Flywheel/crankshaft O-ring seal for most aircooled engines.
Part Number:
111-101-123
Dowel pin for main crankcase bearings on all 1200cc and bigger engines. Five required per engine.
Part Number:
113-105-277
Dowel pin for the crankshaft to flywheel mating surface.
Part Number:
111-105-305
Standard flywheel gland nut for 25 & 30 horse power engines.
Part Number:
113-105-245/F
Flywheel oil seal for the main crank case.
Part Number:
113-105-223
Brass timing gear which drives the distributor.
Part Number:
111-105-227
Locking ring for the distributor drive gear on the crankshaft.
Part Number:
111-105-235/A
0.6mm thick distributor driveshaft shim. Two required per vehicle.
Part Number:
111-105-233
Distributor driveshaft spring for most air cooled VW engines.
Part Number:
113-105-231/B
Driveshaft for the distributor on all aircooled vw engines and T3/T25 CT/CZ & waterboxer engines.