Part Number:
043-298-250
Pair of heat exchangers including gaskets, air hose and fitting kit.
Part Number:
043-255-107/F
Left side heat exchanger with stainless steel tubing & aluminized box for better rust prevention.
Part Number:
043-255-108/F
Right side heat exchanger with stainless steel tubing & aluminized box for better rust prevention.
Part Number:
113-255-001
Exhaust J tubes in 1-1/2 inch stainless steel tube for 1200cc to 1600cc aircooled engines. Suitable to replace stock heat exchangers with various exhausts. Supplied with 2 x exhaust gaskets.
Please note these will not fit 1700cc to 200cc type 4 engines.
Part Number:
AC251714
Stainless steel two tip GT exhaust for 1300cc to 1600cc engines on beetles and karmann ghias from 1960 onwards. Exhaust tips exit through the standard cut outs in the rear valance and produce a very loud throaty sound.
Please note that this exhaust will not fit 1200cc engines or engines using a filter pump.
Part Number:
AC251706
Stainless steel side winder header system. Made from 39mm (1 9/16") inner diameter tubing. This manifold will not work with heat exchangers or preheats and will not fit bay window busses.
Part Number:
AC251707
Stainless steel side winder exhaust silencer for use with the
stainless steel header. This silencer will not fit Bay window busses.
Tailpipe outer diameter = 63.4mm, inner diameter = 61.7mm. Mounting flange outer diameter = 48.7mm, inner diameter = 47.2mm.
Part Number:
AC251709
Stainless steel 4 into 1 header system for most 1300cc to 1600cc and bigger upright, type 1 aircooled engines. This system will work with most standard sized heat exchangers or j tubes.
Part Number:
AC251712
Please note that this muffler will not fit bay window busses.
Part Number:
AC251715
Exhaust tucks up into the rear wheel arch giving good ground clearance for lowered vehicles.
Part Number:
AC251708
Stainless steel 40mm merged header, made from 1 9/16" inner diameter tubing. Comes supplied with stinger tail pipe.
Please note that the stinger tail pipe should only be used for off road use and is illegal to be used on the road.
Part Number:
311-101-463
13mm head M8 anti-seize nut for exhaust manifold to cylinder head mounting. Suitable for virtually all air-cooled VW engines. Eight required per engine.