Part Number:
211-813-162/BK1
Replacement battery securing bracket for the top side of all Bay window battery trays.
Part Number:
211-813-162/BK2
Replacement battery securing bracket for the bottom side of all Bay window battery trays.
Part Number:
211-813-165/H
Platform tray for the left side of the engine bay on Bay window busses from 1968 to 1971.
Part Number:
211-813-162/N
Right hand side battery tray for early Bay window busses and panel vans, featuring top and bottom brackets to secure the battery. Laser cut, pressed and hand finished in house, the main body is 1mm steel, the Top bracket is 2mm steel, and the lower clamping bracket is 2.5mm steel, all as per original parts. Correct for vehicles up to July 1971.
Part Number:
211-813-165/N
Platform tray for the left side of the engine bay on late bay window busses from 1972 to 1979.
Part Number:
211-813-161/M
Battery tray for the left side of 1972 to 1979 late bay window busses for the fitment of a leisure leisure battery. Includes the top and bottom brackets to secure the battery.
Part Number:
211-813-162/M
Battery tray for the right side of 1972 to 1979 late bay window busses. Includes the top and bottom brackets to secure the battery.
Part Number:
131-998-313/A
Battery securing clamp with stainless steel fitting hardware. Fits bay window busses from 1968 to 1979.
Part Number:
131-915-313
Battery securing clamp - see below for specific vehicle suitability.
Part Number:
211-813-227/D
Panel between the engine lid and rear hatch that the engine lid hinges mount to. This is correct for all splitscreen busses from 1966 to 1967 and Early bay window busses from 1968 to 1972. The retaining strip for the engine lid seal is available separately as this is a separate part as standard.
Part Number:
211-813-227/F
Panel between the engine lid and rear hatch that the engine lid hinges mount to. This is correct for all Late bay window busses from 1972 to 1976. This panel has the rolled edge included to hold the engine lid seal in place, the same as the standard panel (not shown in photograph, this will be updated soon).
Part Number:
211-813-417/RS
Seal retaining strip for the engine lid and treasure chest door. Fits splitscreen busses from 1955 to 1967 and Bay window busses from 1968 to 1979.
Part Number:
211-827-025/F
Complete reproduction engine lid for early bay window busses from 1968 to 1971.
Part Number:
211-813-175/D
Complete rear valance with four mounting holes for early bay window busses from 1968 to 1971. Some models, usually in 1971 only had two mounting holes, these are also available under 211-813-175/E.
Part Number:
211-898-179
Complete fitting kit for the rear valance on early Bay Window vans. This will fit the rear valance with four mounting holes, normally 1968 to 1970. See below for a full list of contents.
Part Number:
211-898-178
Complete fitting kit for the rear valance on early Bay Window vans with two mounting holes, normally 1971 models only but sometimes used on other years. See below for a full list of contents.
Part Number:
211-703-491/A
Rear valance inner panel for late bay window vans from 1972 to 1979.
Part Number:
211-813-273/D
Rear valance outer panel for late bay window busses from 1972 to 1979 with hole.
Part Number:
211-813-273/C
Rear valance outer panel for late bay window busses from 1972 to 1979 with no hole.
Part Number:
211-813-355/C/R
Repair panel for the rear light aperture. Fits the left side of splitscreen busses from 1963 to 1967 and bay window busses from 1968 to 1971.
Part Number:
211-813-356/C/R
Repair panel for the rear light aperture. Fits the right side of splitscreen busses from 1963 to 1967 and bay window busses from 1968 to 1971.
Part Number:
211-813-355/E/R
Repair panel for the rear light aperture with hole for reverse light. Fits the left side of splitscreen busses from 1963 to 1967 and bay window busses from 1968 to 1971.
Part Number:
211-813-356/E/R
Repair panel for the rear light aperture with hole for reverse light. Fits the right side of splitscreen busses from 1963 to 1967 and bay window busses from 1968 to 1971.