Part Number:
111-903-900
55 amp alternator conversion kit. Kit includes Bosch alternator, 12 volt pulley wheel, alternator stand, backing plate kit, alternator strap, instructions and wiring kit.
Part Number:
113-101-211
Universal Generator/Alternator stand for all Type 1 based engines. Usable with all makes/types including when converting from dynamo to alternator.
Part Number:
113-903-141
Stainless steel T bolt style strap for 12 volt alternators and generators. Stronger than the original style straps and recommended for higher performance engines.
Part Number:
113-903-141/B
Securing strap for 12 volt alternators/generators with 105mm diameter.
Part Number:
111-903-515
12 volt dynamo brush set for vehicles from 1968 and onwards. Often a common cause for faulty dynamos and a cheap replacement/fix.
Part Number:
111-903-531
Black plastic cover for the dynamo brushes on 12 volt dynamos. Very often broken or missing, this part keeps dirt from getting into the dynamo and from causing any damage.
Part Number:
043-903-109
Pulley wheel for all original and converted 12 volt air cooled vehicles with upright engines. Fits dynamos and alternators, and uses original shims and woodruff key.
Please note - We now have some black and some zinc coated versions of this part. If you would like a specific colour then please call or email to confirm we have it in stock first.
Part Number:
043-903-109/CHR
Chrome pulley wheel for all original and converted 12 volt air cooled vehicles with upright engines. Fits dynamos and alternators, and uses original shims and woodruff key.
Part Number:
111-903-181
Nut for securing the pulley to the dynamo or alternator on most aircooled vehicles.
Part Number:
211-903-183
Dished washer for the dynamo/alternator pulley wheel on most air-cooled VW's.
Part Number:
N-12-705-1
Woodruff key the dynamo or alternator on most aircooled VW's.
Part Number:
111-903-861
Chrome nut and washer for securing the pulley wheel to the alternator or dynamo.
Please note this will only fit dynamos with 105mm diameter.
Part Number:
111-903-860
One piece stainless steel nut and washer for securing the pulley wheel to the alternator or dynamo.
Part Number:
111-903-137/D
Fan belt for aircooled vehicles fitted with a dynamo from the factory and 30 horse power engines. If upgrading to an alternator, use this belt also, as the difference is in the bottom pulley.
Part Number:
068-903-137/D
Fan belt for Type 4 motors, usually fitted to bay window vans from 1973 to 1979.
Part Number:
211-119-471/KIT
Three piece backing plate kit for engines using an alternator or 30 amp dynamo. Will not fit 38 amp dynamos.
The backing plates are coated in a black packing paint. We recommend that the item is either painted or powder coated for a long lasting finish.
Part Number:
311-971-225/C
Original style positive battery cable for most 6 volt and 12 volt aircooled VW's. Includes the original style battery terminal and crimped connectors.
Length of the thick cable is approximately 875mm and the length of the thinner cable is approximately 1210mm.
Part Number:
111-971-228/B
950mm long battery to starter cable.
Part Number:
147-971-235
Universal battery earth strap, for use on most air-cooled vehicles.
Part Number:
131-998-313/A
Battery securing clamp with stainless steel fitting hardware. Fits bay window busses from 1968 to 1979.
Part Number:
131-915-313
Battery securing clamp - see below for specific vehicle suitability.